top of page

Operating Session on the 2’x4’ N Scale Layout

A look at an operating session with a switch list on the 2’x4’ N Scale project layout. This was a simple operating session that only took about 10 minutes, although it would have taken longer if I was able to control the locomotive at a slower speed better. I’ll be converting the Atlas GP15 to DCC in another video, which will allow me much better control of the locomotive at slow speeds, at least on this particular layout with the controls that I have on it. This is a fun layout to operate, especially since you can run other trains while doing the operating session.

Join this channel to get access to perks:

Want to support with a one time donation? Buy me a cup of coffee!

You can watch the full video of the operating session below.

122 views0 comments

Recent Posts

See All

Running Trains One Last Time

A collection of the final video and photos I took of the 2’x4’ N scale layout before packing it up in a shipping crate and sending it off across the country. See how I did that in my Tuesday, June 11t

Atlas N Scale GP15 with a TCS Keep Alive Capacitor!

I picked up a DC versio of an Atlas GP15 and then added a TCS drop in decoder along with one of their small Keep Alive capacitors and ended up with a locomotive that runs incredibly well, even through


bottom of page